The perception of aquaculture on the Swedish West Coast

Efforts are on the way on the Swedish West Coast to develop the capacity for cultivation of marine resources, notably of kelps. Given that this is a region of great natural and national heritage, public opposition to marine developments has been identified as a possible risk factor. This survey thus sought to shed light on awareness levels, perceptions of different types of aquaculture and on reactions to a scenario depicting future aquaculture developments on the West Coast. When asked about their general opinions of aquaculture, respondents tended to be favourable though a majority chose neutral responses. On the whole, respondents were favourable to the depicted scenario. Finally, it was found that the high-awareness group tended to be more supportive than the low or medium-awareness groups, hinting at the benefits of increasing awareness to reduce public aversion and to support a sustainable development of aquaculture on the Swedish West Coast.     

Particulate,Carbon Monoxide,and Acid Emission Factors for Residential Wood Burning Stoves

Emissions from residential wood burning stoves are of Increasing concern in many areas. This concern is due to the magnitude of the emissions and the toxic and chemical characteristics of the pollutants. Recent testing of standard and new technology woodstoves has provided data for developing a family of particulate and carbon monoxide emission factor curves. This testing has also provided data illustrating the acidity of woodstove emissions. The particulate and carbon monoxide curves relate the actual stove emissions to the stove size and operating parameters of burn rate, fuel loading, and fuel moisture. Curves relating stove types to the acidity of emissions have also been constructed.

Test data show actual emissions vary from 3 to 50 grams per kilogram for particles and from 50 to 300 grams per kilogram for carbon monoxide. Since woodstove emissions are the largest single category of particulate emissions in many areas, it Is essential that these emissions be quantified specifically for geographic regions, allowing meaningful impact analysis modeling to be accomplished. Emission factors for particles and carbon monoxide are presented from several stove sizes and burn rates.

The acidic nature of woodstove emissions has been clearly demonstrated. Tests indicate woodstove flue gas condensate solutions to be predominantly in the 2.8 to 4.2 pH range. Condensate solutions from conventional woodstoves exhibited the characteristic buffering capacity of carboxylic acids when titrations were performed with a strong base. The environmental impact of buffered acidic woodstove emissions is not currently well understood; however, it is possible with the data presented here to make semi-quantitative estimates of acid emissions from particulate and carbon monoxide emission factors and wood use inventories.     

Enhancing consultation practices on Air Quality Management in local authorities

Schedule 11 of the Environment Act 1995 underpins the requirement for consultation on air quality issues. The ongoing air quality review and assessment process represents one of the largest locally based science policy and communication initiatives ever undertaken in the UK. This paper outlines the practice of consultation and communication for Air Quality Management (AQM) and reviews the interaction between Environmental Health professionals, as the leading actor in the AQM process and other stakeholders involved in air quality consultation, including the public. Results are presented from a widespread questionnaire survey of English local authorities. Data indicate that the majority of air quality consultation has been carried out with statutory consultees (by sending the review and assessment reports) and the public (via websites and leaflets) in the form of information dissemination.     

Economies of scale in global iron-making

In this paper, we investigate the presence of economies of scale in the global iron-making industry for integrated steel plants, iron making being the first stage in the steel-making process. Iron making depends on basic commodities, such as iron ore, coke and various forms of energy, required in the operation of the blast furnace, which can be classified as essential inputs and used in fixed proportions to produce iron. A generalized Leontief cost function is estimated using panel data for 69 integrated plants, such a specification being appropriate for technologies with essential inputs that are used in fixed proportions in production. A significant scale effect is observed due to the existence of fixed costs and a linear dependence of the cost function on production. Under a simple linear cost function, a rough estimate of the breakeven scale of plant, where costs equal revenue, is 4.5 Mt per year. Competitiveness, as measured by the ratio of plant average cost per tonne to best practice cost per tonne, can be shown to be positively related to the scale of production as well as the cost of essential inputs. Therefore, low-cost producers are also often producers with low raw material costs and production levels below the estimated breakeven scale of operation. Labor costs, although significant, are comparatively less important as a driver towards low costs.     

Two-year monitoring of Cryptosporidium parvum and Giardia lamblia occurrence in a recreational and drinking water reservoir using standard microscopic and molecular biology techniques

Starting in 2006, a monitoring of Giardia lamblia and Cryptosporidium parvum occurrence was conducted for 2 years in the largest drinking water reservoir of Luxembourg (Esch-sur-S?re reservoir) using microscopy and qPCR techniques. Parasite analyses were performed on water samples collected from three sites: site A located at the inlet of the reservoir, site B located 18 km downstream site A, at the inlet of the drinking water treatment plant near the dam of the reservoir and site C where the finished drinking water is injected in the distribution network. Results show that both parasites are present in the reservoir throughout the year with a higher occurrence of G. lamblia cysts compared to C. parvum oocysts. According to our results, only 25% of the samples positive by microscopy were confirmed by qPCR. (Oo)cyst concentrations were 10 to 100 times higher at site A compared to site B and they were positively correlated to the water turbidity and negatively correlated to the temperature. Highest (oo)cyst concentrations were observed in winter. In contrast, no relationship between the concentrations of (oo)cysts in the reservoir and rain events could be established. Though a correlation has been observed between both parasites and faecal indicators in the reservoir, some discrepancies highlight that the latter do not represent a reliable tool to predict the presence/absence of these pathogenic protozoa. In summer 2007, the maximal risk of parasite infection per exposure event for swimmers in the reservoir was estimated to be 0.0015% for C. parvum and 0.56% for G. lamblia. Finally, no (oo)cysts could be detected in large volumes of finished drinking water.     

Compostability of Poly(lactide): Degradation in an Inert Solid Medium

Commercial poly(lactide) degradation was studied in an inert solid medium simulating compost conditions, with the aim to achieve a complete carbon balance of the polymer degradation. The mineralisation rate at the end of the test was compared to those obtained for poly(lactide) degradation in compost. It was shown that the mineralisation rate after 45 days of degradation was quite lower in inert solid medium than in compost but the standard deviation of data was enhanced. A protocol for both extraction and quantification of the carbon included in the different degradation by-products was proposed and the carbon balance of the polymer degradation was followed during the test with a satisfactory accuracy. The non-degraded PLA material was recovered during the test, hence the evolution of the glass transition temperature and the molecular weight was followed. A two-step degradation mechanism was highlighted in inert solid medium, showing the fundamental role of abiotic reactions for PLA degradation in compost.     

Multi-scale foraging variability in Northern gannet (Morus bassanus) fuels potential foraging plasticity

The survival of marine predators depends on behavioural plasticity to cope with changes in prey distribution. Variability in behaviour might predict plasticity and is easier to assess than plasticity. Using miniaturized GPS loggers over several breeding seasons in two Norwegian Northern gannet (Morus bassanus) colonies, we investigated if and how the variability within and between individuals, but also between colonies and years, affected foraging strategies. Results revealed strong individual variability (foraging trip durations, foraging effort and different foraging areas). Individuals from both colonies showed preferred commuting routes, flight bearings and feeding hotspots. Individuals from the largest colony used larger and more foraging areas than individuals from the small colony. Feeding hotspots and foraging ranges varied amongst years in the largest colony only. Our study demonstrated that gannets show flexibility by changing prey fields that are driven by shifting oceanographic conditions.     

Irreplaceable area extends marine conservation hotspot off Tunisia: insights from GPS-tracking Scopoli’s shearwaters from the largest seabird colony in the Mediterranean

Recent meta-analyses identified conservation hotpots at the scale of the Mediterranean, yet those may be crude by lack of detailed information about the spatial ecology of the species involved. Here, we identify an irreplaceable marine area for >95 % of the world population of the Scopoli’s shearwater (Calonectris diomedea), which is endemic to the Mediterranean and breeds on the island of Zembra off Tunis. To this end, we studied the three-dimensional at-sea movements of 50 breeding adults (over a total of 94 foraging trips) in 2012 and 2013, using GPS and temperature–depth recorders. Feathers were also collected on all birds to investigate their trophic status. Despite Zembra being the largest seabird colony in the Mediterranean (141,000 pairs), the per capita home-range of Scopoli’s shearwaters foraging from this colony was not larger than that of birds from much smaller colonies, indicating highly beneficial feeding grounds in the Gulf of Tunis and off Cap Bon. Considering depleted Mediterranean small pelagic fish stocks, supposed to be Scopoli’s shearwater prey base, we therefore speculate that birds may now also largely feed on zooplankton, something which is supported by our stable isotopic analyses. Crucially, shearwater at-sea feeding and resting areas showed very little overlap with a conservation hotspot recently defined on the western side of the Gulf of Tunis using meta-analyses of species distributions relative to anthropogenic threats. We therefore propose a major extension to this conservation hotspot. Our study stresses the importance of detailed biotelemetry studies of marine megafauna movement ecology for refining large-scale conservation schemes such as marine protected area networks.